Hitachi VM-3700A User Manual

AUDIO DUBBING 

 

55

The audio dubbing feature lets you record new audio (sound) on a previously recorded 
tape without erasing the original video. 
When you audio dub a tape, the previous audio is erased and replaced with new sound. 

 

NOTES: 
• Sound from the built-in microphone and the AUDIO jack can be dubbed. 
• When dubbing audio from the built-in microphone, set "AV OUT/IN" switch to "OUT" and 
do not connect the "AUDIO" jack. When dubbing audio from the "AUDIO" jack, set the 
"AV OUT/IN"  switch to "IN". 

1. Insert a recorded tape. Be sure that the record safety tab is not missing. 
2. Place "POWER" switch to "VIDEO" position. 
3. Play the tape and press "REC/PAUSE" button where you want to dub audio. 
• The camera/recorder enters the still play mode. 
4. Press "DUBBING AUDIO/VIDEO" and "PLAY" buttons at the same time. 
• "A.DUB 

" appears in the viewfinder. 

NOTE: If "DUBBING AUDIO/VIDEO" and "PLAY" buttons are pressed twice, audio 
and video dubbing will start. In this case, press "STOP/EJECT" button to release the 
dubbing mode. 
5. Press "RECORD/PAUSE" button to start audio dubbing. 
6. Press "STOP/EJECT" button to stop audio dubbing. 

NOTE: If counter memory "M" appears in the viewfinder, the tape stops automatically at 
the reading of "0:00:00" and audio dubbing stops.