Moultrie D50IR Leaflet

MFH-DGS-D50IR

Unlock the two latches to open the camera cover. 
Insert 4 fresh C Cell alkaline batteries into the battery compartment.
Place the batteries so the positive (+) and negative (-) polarities are
lined up correctly as indicated in the battery compartment.
Close the camera cover.  When the battery indicator turns “Green”,
replace the batteries with fresh C cell alkaline batteries.

In SETUP mode, the LCD will show the time.  Press ENTER and the 
hour will flash.  Press Up(     ) or Down(     ) to select the proper hour, 
then press ENTER again and the minute will flash.  Press Up(     ) or 
Down(     ) to select the proper minute.  Press ENTER again, AM or PM 
will flash.  Press Up(     ) or Down(     ) to select the Day and Night 
accordingly. Press ENTER to confirm the selections.  

After setting up the time, press SELECT and the LCD will show the 
year.  Press ENTER and the year will flash.   Press Up(     ) or Down
(     ) to select the proper year and press ENTER again to confirm.

After setting up the year, press SELECT and the LCD will show the 
date.  Press ENTER and the month will flash.  Press Up(     ) or Down
(     ) to select the proper month, then press ENTER again and the day 
will flash.   Press Up(     ) or Down(     ) to select the proper day, then 
press ENTER again to confirm.

The camera can be aimed using the
infrared detection system.  Slide the
MODE switch to IR AIM position. 
Press and hold the ON/OFF button until
“Ir” is displayed on the LCD panel.  
The IR aiming mode is now active.  
Wave your hand in front of the camera.  
The STATUS light will turn red every time 
motion is detected.  Find your desired target.  
Note: The camera will shut down automatically after 2 minutes to save 
battery life.

Turn the unit ON or OFF.  To turn ON you must press and hold the 

ON/OFF button until the LCD display activates.

Depending on the position of the switch,

there are 3 possible functions: IR AIM, 

SETUP and AUTO.

Depending on the position of the switch, 

there are 4 event delay time can be set: 1 

min, 5mins, 10mins and 30mins.

Depending on the position of the switch, there is one video option: 

VID and two images resolution options: HI and LO

 

Used to change the settings within the

SETUP mode. 

Make selections in SETUP mode.

Confirm the selection in SETUP mode.

Insert SD card for memory with the metal

contact facing down. A SD card is required in order for the camera to 

capture images/videos.

To indicate a motion is detected in IR AIM

mode.

-To indicate the batteries are low, please

replace batteries with fresh batteries. 

To change digital camera settings, the MODE switch has to be in the 

SETUP position.

Turn the MODE switch to the AUTO position, press and hold the 

ON/OFF button to switch on the camera. In the AUTO mode, the LCD 

display shows the time(Fig1) and then counts down for 10 sec(Fig2). 

The LCD goes off and the camera is STANDBY for capturing.

If a motion is detected, the camera will wake up and show the 

time(Fig3). While a picture or video clip is capturing, the LCD shows 

“SNAP”. After the capturing process is finished, it will show the 

number of pictures or video clips remain(Fig4). Then the camera will 

be in STANDBY mode again.

 

Fig1 Shows Time

AM

10:30

AM

10:30

0231

10

Fig3 Shows Time

Fig2 Count down

10 sec

Motion detected &

Capture picture

Fig4 NO. of Pictures

remain

In the AUTO mode, if the LCD shows “0000”, it means that the 

memory is full. The camera will shut off automatically to save battery 

life. Please insert an empty SD memory card for memory space.

If the BATTERY indicator turns green, it means that the battery is low.  

Please replace batteries with fresh batteries.

Use the mounting strap included to 
mount the camera securely in the
desired location.  

10

8

17

9

16

11

15

14
13
12

D50IR MODEL CAMERA

8.  POWER ON/OFF BUTTON
9.  FUNCTION SWITCHES
 

• MODE (IR AIM, SETUP, AUTO)

 

• DELAY (1, 5 , 10, 30 MINS)

 

• RESOLUTION (VID, HI, LO)

10. STATUS INDICATOR
11. BATTERY INDICATOR

16. BATTERY COMPARTMENT
17. 12-VOLT EXTERNAL POWER
 

PORT

 

(This camera is compatible

 

with the Moultrie Powerpanel

 

accessory to extend your

 

battery life. Please visit our

 

website at

 

www.moultriefeeders.com

 

for more information

12. SELECT BUTTON
13. CHANGE BUTTONS
 

(UP      /DOWN     )

14. ENTER BUTTON
15. SD MEMORY CARD SLOT

1. Automatic AUTO mode records images/videos using infrared  
  detection. ALWAYS LEAVE THE MODE SWITCH IN THE AUTO  
  MODE OR THE  CAMERA WILL NOT OPERATE.

2. Setup SETUP mode for setting up Date and Time as described in  
  previous section.

3. IR Aim IR AIM mode for helping you to aim the camera towards  
  the object.  Please consult the section 6. OPERTAION – AIMING  
  for detail description.

NOTE: When left inactive for more than 2 minutes in SETUP and IR 
AIM mode, the camera will automatically shutdown.  The camera will 
need to be restarted to resume operation in SETUP and IR AIM mode.

There are 4 different delay settings: 1 MIN., 5 MIN, 10 MIN. or 30 

MIN..  Slide the DELAY SWITCH to the position of your selection.  

When the game camera is in AUTO mode, it will work according to 

your selected event delay.

There are 3 different capture settings: Video (VID), High (HI) and Low 

(Lo).  Please refer to the section 7 MEMORY – STORAGE/CAPCITY for 

the description of each setting.  Slide the RESOLUTION SWITCH to 

the position of your selection.  When the game camera is in AUTO 

mode, it will work according to your selected capture setting.

1.  IR LEDs
2.  CAMERA LENS 
  (COLOR SENSOR)
3.  CAMERA LENS
  (BLACK & WHITE SENSOR)
4.  PIR SENSOR
5.  LCD STATUS DISPLAY
6.  LOCKABLE LATCHES
7.  WEATHER-RESISTANT CASE

D50IR MODEL CAMERA

Operational Modes: 

Auto – Automatic operation

 

Setup – Set Date and Time

 

IR Aim – Infra Red Aiming object

Video:  

10 seconds AVI clips 

Picture Resolution (pixels): 

LO/HI 

 

(See Section7, Memory • Storage / Capacity)

Format: 

JPEG – still images and AVI – video clips

Max. External SD Memory: 

UP to 16GB (optional)

Infrared Sensor: 

Passive, activated when motion is detected

Infrared Sensor Range: 

30 ft. / 22° width

Flash: 

IR LEDs 

Flash Range: 

5 ft. - 30 ft.

Image Output: 

Record in SD card

Event Delay: 

1 MIN., 5 MIN, 10 MIN. or 30 MIN.

LCD Display Panel: 

Displays Date/Time Setup and Images/

 

Videos Count

Power Supply: 

4 Alkaline C Cells batteries

Duty Cycle: 

30 days average with 4-C Cell batteries

Adjustable mounting: 

Mounting Strap

1

4

2

5

7

6

3

6

Your camera supports external SD memory card ONLY (NO internal
memory available).  The LCD shows “0000” if NO SD memory card 
is inserted in AUTO mode. The camera cannot capture  without 
external memory.

Please inserts a SD memory card. 

D50IR MODEL CAMERA

Open the camera cover.  Slide the MODE switch to the SETUP 
position.  Press and hold the ON/OFF button until the time appear on 
the LCD display.  If you want to turn the unit off, simply press the 
ON/OFF button again.  The LCD shows “OFF” and then goes off.  
NOTE: If there is no activity for 2 minutes, the camera will 
automatically shut off to conserve battery life.

Time

10:30

2009

131

Press
“SELECT”

AM

Year

Month & Date