Philips AZ5130 User Manual

18

AZ 5130  

page

18

1. Set the source selector to TAPE/OFF.
2. Press STOP•OPEN 

9 / to open the cassette holder.

3. Insert a recorded cassette.
4. Press PLAY

1 and playback will start.

5. Adjust the sound using the VOLUME and DBB controls.
6. For brief interruptions, press PAUSE

;. Press PAUSE ; again to

resume playback.

7. By pressing 

5 or 6,fast winding of the tape is possible in both

directions.

8. To stop playback, press STOP•OPEN 

9 /

™ The keys are automatically released at the end of the tape.

9. Set the source selector to TAPE/OFF position (with the 

cassette keys are released) to switch off the set.

• Recording is permissible insofar as copyright or other rights 

of third parties are not infringed.

• This deck is not suitable for recording on CHROME (IEC 

II) 

or METAL (IEC 

IV) type cassettes. For recording you should 

use NORMAL type cassettes (IEC 

I) on which the tabs have 

not been broken.

• Check and tighten slack tape before use with a pencil, to 

avoid jamming the deck machanism.

• The recording level is set automatically. Altering the VOLUME

and DBB controls will not affect the recording in progress.

• No recording will take place during the 3 seconds, when the

leader tape passes the recorder heads.

• To prevent the accidental erasure of a recording, keep the cassette side to be safeguarded in

front of you and break out the left tab. Recording on this side is no longer possible.

P3 CD

S

all

prog

shuffle

AZ5130/01 eng  9/24/03  1:18 AM  Page 18