GE VG4061 User Manual

Numbers (0 through 9)  Select a channel up to 99 by pressing

two numbers. Select a cable channel over 99 by pressing and

holding 1 until 1 – – appears on the screen. Then press the other

two numbers.

OFF  Turns off the VCR when the remote is set to control the

VCR. Turns off other components if remote is programmed.

PAUSE  Pauses playback or recording. Press PAUSE again to

return to playback or recording.

PLAY  Plays a tape.

RECORD  Starts VCR recording. Also used for express

recording.

REVERSE  Rewinds the tape when the VCR is stopped.

Searches backward through a tape during playback. Starts slow-

motion playback when tape is paused.

SEARCH  Displays Index and Zero Search menus on TV screen

when VCR is stopped.  Advances the tape approximately 30

seconds of recorded material during playback. Each press

advances the tape an additional 30 seconds up to five minutes.

SPEED  Selects a recording speed (SP or SLP).

STOP  Stops the current VCR function such as record, playback,

rewind, or fast forward.

TRACKING Up or Down  Lets you manually reduce the

streaks that may appear on the picture during play, slow motion,

or pause. Reduces picture “jitter” during stop-action playback.

TV•VCR  Switches the picture signal so that it either comes

from the VCR or cable/antenna system.

   Selects next higher or lower channel in

the TV’s channel memory.

CLEAR  Removes menus or status displays from the screen.

GO BACK  Switches between two channels. Select one channel

and then select another using the number buttons. Press GO

BACK to switch between the two channels.

INFO   Shows the TV’s status displays on the TV screen.

MUTE  Reduces volume to minimum level.