Euphonix MD704 User Manual

Euphonix MADI Converters Operation Manual

 

AM713 and MA703 Converters

14

Figure 2-3 MA703 Rear Panel

Input Voltage Selector: This red switch sets the unit to either 110/115 VAC or 220/
230/240 VAC environments. A fuse must also be changed for 220/230/240 VAC oper-
ation (see page 6). Units are shipped set and fused for 110/115 VAC. 

Power Connector (IEC) and Fuse Tray: The IEC power connector accepts standard 
IEC power cords. The fuse tray contains both the active and spare fuses. See page 6 to 
learn how to change the fuse for 220/230/240 VAC operation. 

Analog Outputs (male XLR): 24 balanced analog outputs on XLR connectors. Output 
level is set from the front panel.

Auxiliary Analog Outputs (male XLR): Two balanced analog outputs on XLR con-
nectors. Output level can is set from the front panel.

AES/EBU Digital Outputs (male XLR): Stereo AES/EBU digital outputs on one XLR 
connector. Functions in parallel with the auxiliary S/PDIF output and the two inputs 
should not be used simultaneously.

S/PDIF Digital Outputs (RCA): Stereo S/PDIF digital output on one RCA connector. 
Functions in parallel with the auxiliary AES/EBU output and the two inputs should not 
be used simultaneously.

AES Sync In (female XLR): Master clock input for the converter when using AES as 
the Sample Rate Source. 

AES Sync Thru (male XLR): Outputs the same signal connected to AES Sync In.

Word In (BNC): Master clock input for the converter when using Word Clock as 
Sample Rate Source. 

Word Out (BNC): Outputs a Word Clock signal synchronized to the Sample Rate 
Source. In the presence of an external Word clock input, this connector provides a 
regenerated version of the input signal. Without an external sample rate source, this 
connector outputs an internally generated clock signal.