Toshiba DKT2004-CT User Manual

➤

1. With the handset off-hook, press a extension. You hear dial tone and the LED 

flashes green (in-use).

2. Press 

 + extension for the door location. A two-way talk-path exists between 

your telephone and the called door phone. You can audibly monitor the area around 
the door phone.

➤

1. Press the door phone button and then release it. You hear a distinctive ringing 

tone–one or five times (set in system programming).

2. When answered, speak at a normal voice level in the direction of the door phone.

If a station remains off-hook for a programmable period, it can be automatically 
treated as an Emergency Call and directed to an emergency destination. The station 
may have partially dialed a number or have dialed no digits at all. Each station is 
programmed with its specific emergency ringdown destination.

A station number or a group pilot number can be specified as an emergency ringdown 
destination. In a private network, the station or pilot number must be in the same 
network node. Remote emergency destination and door phones are not permitted.

Calls on hold can be released automatically if the held party hangs up and the network 
provides a hold-release signal.

The DKT2004-CT does not support Exclusive Hold.

➤

Press 

+2/'

. The Line or [DN] LED flashes green at the on-hold rate.

You hear recall tone when your station is idle (or two times only when busy) if you 
do not retrieve the held call before “Hold the recall” time set in system 
programming expires.