MotoSAT T2 User Manual
4
Operating the T2 AutoMotion Dome
1- Plug in all necessary cable connections to the back of the T2 AUTOMOTION.
(See Figure Below)
A
B C D
Connection Definition:
A. Out to Receiver (Receiver) - Used to connect the T2 AutoMotion to
the satellite receiver.
B. In from the Dish (Antenna) - Used to connect the dish to the T2
AutoMotion with the supplied single RG6 coax cable.
C. Not used. For testing purposes only
D. Power Cord to 115 VAC
D. Power Cord to 115 VAC
Operation
2-
Turn on the T2 AutoMotion by pressing the power switch located on the front
panel.