Hitachi JPEG2000 User Manual

 

- 50 -   

 

 

 

First, identiry if you have Static IP or Dynamic IP service. If you do not know, ask your ISP (Internet Service 

Provider). If you have Static IP, your ISP should provide you a static IP address, which will never change even 

when you reboot your modem.   

      [Via ADSL with Static IP address]

 

 

 

 

 

 

 

 

     

 

 

Connect the Network cable of Cable Modem output to DVR 

 

 

 

 

 

 

 

  Enter [SYSTEM MENU]f [EXTERNAL DEVICE] f [TP/IP SETUP]f [IP CONFIG SETUP]. Enter the IP 

address, gateway, subnet mask provided by your ISP. Then, assign a port number to the DVR, or you can use 

the default one as well. 

  If you find that you cannot enter or change any addresses, check if DHCP is set to Automatic. Press MENU to 

go back to the previous page, [TCP/IP Setup], and then enter [DHCP SETUP]. Select DHCP MODE and press 

ENTER to switch DHCP to MANUAL 

  In some very rare cases, we found the DVR did not support certain Static IP Addresses. If it happens, add a 

Router to the network system. The setup is the same as the next session, [Via ADSL with Dynammic IP.]