Toshiba 24V4210U User Manual

146

Use the Channel Number buttons (0–9) to input the current 
password.

If the password has not been set yet, key in “0000.” This is the 
factory default password.

Use the Channel Number buttons (0–9) to input the new 
password.

You will be prompted to confirm the new password.

Use the Channel Number buttons (0–9) to input the new 
password again.

Note this new password for future reference.

If you forget the system password:

Make sure there is no disc in the disc slot.

Press and hold down the VOLUME (–) button on the TV 
control panel, and then press the number 4 button on the 
remote control for a few seconds.

The “Initializing” message appears on-screen to indicate that 
the password has been reset to its default factory setting 
“0000.” All DVD Setup related settings will also be reset to 
their default factory values.

Select the sound format of the digital output depending on the 
enabled signal connection.

❖

Spdif/Raw: Select this option to output the signal in its native 
format.

❖

Spdif/Pcm: Changes Dolby

®

 Digital output to PCM. Select 

this option when using a two-channel digital stereo amplifier.

MPEG audio will always be in PCM format regardless of the Digital 
Output setting.