Elo TouchSystems ET7001L User Manual

User Manual: Interactive Digital Signage 

SW601990 Rev E, Page 13 of 36 

 

Chapter 5: Operation

 

 
To turn the touchmonitor on or off, press the touchmonitor power button once. If a computer 
module is installed, then the computer module will also turn on with the monitor. 
 
To abruptly power off the computer module and touchmonitor, press and hold the touchmonitor 
power button until the computer shuts off. 
 
To gracefully shut down the computer module, follow the computer modules operating systems 
normal power off procedure. 
 
A Power Status LED is provided on the OSD Remote that functions according to the following 
table: 

OFF OFF 

SLEEP BLINKING 

ON ON 

 
The system consumes low power when in SLEEP and OFF modes. For detailed power 
consumption specifications, refer to technical specifications available on the Elo website 
www.elotouch.com. 
 
Touching the screen will bring the system out of MONITOR SLEEP mode.   
 
If long periods of disuse are planned, unplug the AC power cable to save power. 
 
The maximum voltage, frequency and current for the touchmonitor are provided in the power 
ratings table below: 

 

Operating Voltage 

Range 

Operating Frequency 

Range 

Operating Current 

Range 

ET32/4201L 

100 - 240Vac 

50/60 Hz 

3.6 – 1.5 A 

ET5501L 

100 - 240Vac 

50/60 Hz 

5 – 2.1 A 

ET7001L 

100 - 240Vac 

50/60 Hz 

5 – 2.1 A