Firstech, LLC. CM1000A User Manual

 

 

- 49 - 

With lock and unlock on the same button. 

1.  Enter programming by pressing: 

a.  The (lock/unlock) button, and the (start/stop) button 

simultaneously until the parking lights flash once. This is 
Menu 1. 

b.  The (lock/unlock) button, and the (query) button 

simultaneously until the parking lights flash once. This is 
Menu 2. 

 
2.  Tap the (trunk) button 3 times, waiting for a parking light flash 

between each time. 

 
3.   The parking lights will flash three times, signaling that all of the 

options have been reset, and that you have exited programming mode. 

With separate lock and unlock buttons. 

 

1.  Enter programming by pressing: 

a.  The (lock) button, and the (unlock) button simultaneously 

until the parking lights flash once. This is Menu 1. 

b.  The (lock) button, and the (start/stop) button simultaneously 

until the parking lights flash once. This is Menu 2. 

 
2.  Tap the (start/stop) button 3 times, waiting for a parking light flash 

between each time. 

 
3.  The parking lights will flash three times, signaling that all of the 

options have been reset, and that you have exited programming mode. 

1.  Enter programming by pressing the (trunk) button, and the (siren) 

button simultaneously until the parking lights flash once.  

2.  Tap the (trunk) button three times, waiting for a parking light flash 

between each time. 

 
3.  The parking lights will flash three times, signaling that all of the 

options have been reset, and that you have exited programming mode.