Firstech, LLC. CM1000A User Manual
- 59 -
will stay latched until the auxiliary output is activated again. If the Option
Programmer is used, you can program this output for a timed latched output of 3
to 99 seconds.
Programmer is used, you can program this output for a timed latched output of 3
to 99 seconds.
2-8 – Siren Output Duration
With this option on the default setting, if the alarm is triggered, the siren will
sound for 30 seconds. On the optional setting, the siren will sound for 60 seconds.
sound for 30 seconds. On the optional setting, the siren will sound for 60 seconds.
2-9 – Channel Expander Mode
This option requires the installation of the optional Channel Expander module. If
you need more than the 2 supplied auxiliary outputs, you can install the Channel
Expander for 5 additional outputs. With this option turned on, the Aux 2 wire
from the system becomes non functional and the Aux 1 wire becomes the data
wire that communicates with the Channel Expander. Please see the Channel
Expander instruction manual for more details.
you need more than the 2 supplied auxiliary outputs, you can install the Channel
Expander for 5 additional outputs. With this option turned on, the Aux 2 wire
from the system becomes non functional and the Aux 1 wire becomes the data
wire that communicates with the Channel Expander. Please see the Channel
Expander instruction manual for more details.
2-10 – Passive Arming With Channel Expander Mode Enabled
The ability to activate/deactivate Passive Arming through the remote is lost once
Channel Expander mode is activated. If the Channel Expander is being used, set
this option to the optional setting to activate Passive Arming. Leave it on the
default setting to prevent Passive Arming.
Channel Expander mode is activated. If the Channel Expander is being used, set
this option to the optional setting to activate Passive Arming. Leave it on the
default setting to prevent Passive Arming.
Additional Programming
Some additional features have been added to the CompuStar systems that are not
programmed through the option menus. Details on how to program these options are
listed here