Firstech, LLC. CM4200 User Manual

 

 

- 47 - 

 
1.  Enter programming by pressing: 

a.  The (trunk) button, and the (start) button simultaneously until 

the parking lights flash once. This is Menu 1. 

b.  The (trunk) button, and the (stop) button simultaneously until 

the parking lights flash once. This is Menu 2 . 

 

2.  Press the (stop) button until the parking lights flash, the number of 

times equal to the option you would like to change. For example, if it 
were the 5

th

 option in the menu that you would like to change, you 

would press the (stop) button five times. 

 

5.  Wait a few seconds, and the parking lights will flash the number of 

times corresponding to the option number you are about to modify. If 
the number of times the lights flash does not correspond with the 
option you want to change, wait a few seconds and the siren/horn will 
sound, signaling that you have exited programming mode. After the 
siren/horn sounds, you can retry the process from the beginning. 

 

6.  Immediately after the parking lights stop flashing from step 3, press: 

a.  The (unlock) button for the factory default setting. The parking 

lights will flash once. 

b.  The (start) button until the parking lights flash, for the optional 

setting. The parking lights will flash twice. 

 

You will need to perform these steps for each option you would like to change. 

 

1.  Enter programming by pressing: 

c.  Button ( I ), and button ( II ) simultaneously until the parking 

lights flash once. This is Menu 1. 

d.  Button ( I ), and button ( IV ) simultaneously until the parking 

lights flash once. This is Menu 2. 

 

2.  Tap button ( IV ) the number of times equal to the option you would 

like to change. For example, if it were the 5

th

 option in the menu that 

you would like to change, you would tap button ( IV ) five times. The 
CompuStar system will flash the parking lights once each time you tap 
button ( IV ).