Lg Electronics M2350D User Manual

The remote control doesn’t work

y

Check to see if there is any object between the product and the
remote control causing obstruction. Ensure you are pointing the
remote control

y

Ensure that the batteries are installed with correct polarity (  to  ,  
to  ).

y

Ensure that the correct remote operating mode is set: TV, VCR, etc.

y

Install new batteries.

Power is suddenly turned off

y

Is the sleep timer set?

y

Check the power control settings. Power interrupted.

y

If the Monitor Set is switched on and there is no input signal, it
will switch off automatically after 15 minutes to save the power
consumption.

y

When a broken file was played in the USB mode, the Monitor set may
turn off. Please check the file in your usb storage.

y

Except the screen off mode of the energy saving menu.

No picture & No sound

y

Check whether the product is turned on.

y

Try another channel. The problem may be with the broadcast.

y

Is the power cord inserted into wall power outlet?

y

Check your antenna direction and/or location.

y

Test the wall power outlet, plug another product’s power cord into the
outlet where the product’s power cord was plugged in.

Picture appears slowly after

switching on

y

This is normal, the image is muted during the product startup process.
Please contact your service centre, if the picture has not appeared
after five minutes.

No Colour, poor colour, or poor

picture

y

Adjust Colour in menu option.

y

Keep a sufficient distance between the product and the VCR.

y

Try another channel. The problem may be with the broadcast.

y

Are the video cables installed properly?

y

Activate any function to restore the brightness of the picture.

Horizontal / vertical bars or picture

shaking

y

Check for local interference such as an electrical appliance or power
tool.

Poor reception on some channels

y

Station or cable product experiencing problems, tune to another
station.

y

Station signal is weak, reorient antenna to receive weaker station.

y

Check for sources of possible interference.

Lines or streaks in pictures

y

Check antenna (Change the direction of the antenna).