Magnavox 50ML8205D/17 User Manual

32

No power

• Check that the power cord is properly connected.

• Make sure the wall power outlet is working.

• Make sure the remote has batteries.

• If the remote control and control panel do not work, ensure that the 

power switch on the rear of the TV is set to ON.

Remote control not working

• Replace the batteries

• Check that the batteries are inserted correctly

• Check that the remote control is close enough to the display

• Adjust the angle between the remote control and the display. 

Picture is fuzzy

• Check that the device generating the picture signal is operating prop-

erly. 

• Check that you have set the display to receive the proper signal source.

No sound

• Check to see if the Mute function is activated.

• Check the volume level.

• Check that the device generating the audio signal is properly connected 

to the display. 

Picture is unstable

• Check that your video card is set within the allowable range.

Screen is blank

• Contact the dealer where you purchased the display. 

A buzzing sound comes from 

the speakers during display.

• Check that the socket of the grounded hole is good. 

No image.

• Check that the signal source is connected to the correct terminal. 

Temperature LED is red

• Turn off the TV set and allow it to cool down. If the LED still persists, 

contact the nearest service center.

Poor picture quality

• Try switching to another channel and see if the problem persists.

• Adjust the antenna.

• Check all cable connections.

Picture rolls vertically

• Adjust the antenna.

• Check all cable connections.

• If you are using a VCR, check the tracking.

Lamp indicator LED red

• Lamp failed. Contact your nearest service center.

There is a switch on the TV

• Default is on.

Other

• Contact the dealer, authorized service personnel, or the Magnavox help 

number provided here: 1-800-705-2000