GE 0150-0193C User Manual

0150-0193C 

44 

Calibur DVMR

 Triplex 

A form is provided in section 9 to keep track of scheduled macros. 

 

 

q  Main Menu 

A submacro is an RS232 command string used to control a peripheral device.  Submacros are 
activated during macros.  See the table on page 43 for information about programming a macro to 
activate a submacro. 

Select the submacro you wish to edit from the menu system.  This menu will appear.   
 

 

 

Use this menu to create the RS232 command string.  Press the Enter button to Enter and Exit the 
submacro edit mode.  Rotate the Jog/Shuttle to navigate among the fields and change the values.  
Each byte value can be set from 0 to 255. 

 

{F}

   

1

 

A macro is a recorded sequence of up to 32 keystrokes.  To activate a 
macro, press the Function button followed by the Number button of the 
desired macro.  While running, the macro is indicated on-screen as the letter 
F and the macro number. 

The user can cancel the macro at any time by pressing the Function button. 

Function and 

Number Buttons 

{F}

    

 

To adjust the time one hour for daylight savings time, press the Function 
button, then the Sequence button.  If this function is activated during April, 
one hour is added to the time.  If this function is activated in October, one 
hour is subtracted from the time.  This function will only operate once per 
time period. 

Function and 

Sequence Buttons 

 

Use this menu to: 

• 

Enable motion detection on a per camera basis. 

• 

Activate individual zones in a scene to respond to motion  
detection. 

• 

Activate the on-screen motion detection indicator. 

• 

Set motion detection as Activity detection or Intrusion Detection. 

• 

Configure the motion detection parameters on a per camera basis.