Grundig DVR User Manual
09
20
The settings menu
DON’T FORGET! You can use the skip
forwards and backwards function when
watching a recording by pressing the [t]
or [u] buttons.
forwards and backwards function when
watching a recording by pressing the [t]
or [u] buttons.
Auto Disk Management - This will allow the
oldest recordings that have been viewed to be
over written if the Digital TV Recorder is short
of space.
oldest recordings that have been viewed to be
over written if the Digital TV Recorder is short
of space.
DON’T FORGET! If you don’t want a
programme to be overwritten you can
protect it.
programme to be overwritten you can
protect it.
Show Available Space As - This sets how you
want remaining space to be shown in the
menus. You can choose from the percentage of
space, hours of standard definition, or hours of
high definition available.
want remaining space to be shown in the
menus. You can choose from the percentage of
space, hours of standard definition, or hours of
high definition available.
Format Hard Disk Drive - This will reformat your
hard disk drive.
hard disk drive.
DON’T FORGET! This will permanently delete
all of your recorded programmes, even if
they are protected.
all of your recorded programmes, even if
they are protected.
Other
Display & Audio
Language
Parental
Freesat +
Other
R
Exit Menu
.
Auto Standby
Power Save in Standby Mode
Upgrade Software
Add Non Freesat Channels
First Time Installation
Select
Show Non Freesat Channels
EXIT
OK
Genre Page
Weds 8 Oct 8:22pm
Settings
Genre Page - This setting allows you to turn on
or off the genre selection page. When you press
[GUIDE] when the genre page is turned off, the
programme guide will be shown straight away.
The default setting is that the genre page is
shown.
or off the genre selection page. When you press
[GUIDE] when the genre page is turned off, the
programme guide will be shown straight away.
The default setting is that the genre page is
shown.
Show Non Freesat Channels - This setting
allows you to see the manually added free to air
channels in the channel list.
allows you to see the manually added free to air
channels in the channel list.
DON’T FORGET! The default setting is not to
show manually added free to air channels.
Free to Air channels are not added to the
programme guide.
show manually added free to air channels.
Free to Air channels are not added to the
programme guide.
Auto Standby - This will put the Digital TV
Recorder into standby if there has been no
user activity for four hours. A thirty second
countdown is shown on screen, to give the user
the option to cancel the Digital TV Recorder
going into standby.
Recorder into standby if there has been no
user activity for four hours. A thirty second
countdown is shown on screen, to give the user
the option to cancel the Digital TV Recorder
going into standby.
Power Save in Standby Mode - This setting
reduces the amount of energy used when in
standby mode.
reduces the amount of energy used when in
standby mode.
Upgrade software - This setting allows the HD
Digital TV Recorder to search for new software.
Digital TV Recorder to search for new software.
Add Non Freesat Channels - See page 23 for
further instructions.
further instructions.
First Time Installation - This setting allows you
to perform a first time installation. Follow the
instructions on-screen to setup your HD Digital
TV Recorder.
to perform a first time installation. Follow the
instructions on-screen to setup your HD Digital
TV Recorder.
DON’T FORGET! A first time installation
will remove all non freesat channels, and
default your Parental PIN to 0000.
will remove all non freesat channels, and
default your Parental PIN to 0000.