JVC 0503-AH-ID-JVE User Manual

Masterpage:Right-NoTitle0

Filename [HM-HDS4EX_07Sub.fm]

Page 97

April 7, 2003 2:57 pm

3. Tape-to-tape editing is not 

possible.

● The source (another video recorder, 

camcorder) has not been properly 
connected.

Confirm that the source is properly 
connected.

● All necessary power switches have 

not been turned on.

Confirm that all units’ power switches 
are turned on.

● The input mode is not correct.

Set the input mode to “L-1”, “L-2” or 
“F-1”.

4. Camcorder recording is not 

possible.

● The camcorder has not been 

properly connected.

Confirm that the camcorder is 
properly connected.

● The input mode is not correct.

Set the input mode to “L-1”, “L-2” or 
“F-1”.

5. “

䡬

” and “

$” on the front display 

panel won’t stop blinking.

● The end of the tape was reached 

during recording.

● The programme may not have been 

recorded in its entirety. Next time 
make sure you have enough time 
on the tape to record the entire 
programme.

1. Timer recording won’t work.

● The clock and/or the timer have 

been set incorrectly.

Re-perform the clock and/or timer 
settings.

● The timer is not engaged.

Press 

# and confirm that “#” is 

displayed on the front display panel.

2. Timer programming is not 

possible.

● Timer recording is in progress.

Timer programming can’t be 
performed while a timer recording is 
in progress. Wait until it finishes.

3. “

#” on the front display panel or 

S-VHS indicator won’t stop 
blinking.

● The timer is engaged but there’s no 

cassette loaded.

● The cassette is ejected, then the 

recorder is powered off 
automatically after the end of the 
tape is reached during timer 
recording.

Load a cassette with the record safety 
tab intact.

4. “

#”, “

䡬

” and “

$” on the front 

display panel won’t stop blinking.

● The loaded cassette has had its 

record safety tab removed.

Remove the cassette and cover the 
hole with adhesive tape, or insert a 
cassette with the record safety tab 
intact.

● The end of the tape was reached 

during timer recording.

The programme may not have been 
recorded in its entirety. Next time 
make sure you have enough time on 
the tape to record the entire 
programme.

HM-HDS4EX_07Sub.fm  Page 97  Monday, April 7, 2003  2:58 PM