Maxtor SC324 User Manual

When the KEY MUTE is set to “YES”, there will
be no sound when you press any of the keys during
operation.  

When enabled (YES), recording will continue 
uninterrupted  when the HDD is full. The previous 
recording will be Overwritten in a “first in, first out”
basis.    

(SYSTEM)

BUZZER                                       ON
EXT ALARM                                 ON
VLOSS ALARM                            ON
KEY MUTE                                 YES
HDD OVERWRITE                     YES
MESSAGE LATCH                     YES
DATE DISPLAY                       D/M/Y
DATE                   26-DEC-2003 [FRI]
TIME                                     22:55:34
CLEAR HDD                               YES             
SYSTEM RESET                        YES

-16-

When disabled (NO), recording will stop when the HDD fills up. It will then need to be

cleared in order for recording to continue.

If “YES” is selected the DVR alarm messages remain on the screen until acknowledged
by the user with a key-press. If “NO” is selected the DVR message will disappear after
10 seconds. “NO” is the default setting. 

(vii) DATE DISPLAY – There are 3 formats to display the date on the screen: Y/M/D, M/D/Y,

D/M/Y or OFF. Choosing OFF will remove the date on the monitor.

(viii) DATE – Used to set the date on the DVR.

(ix)  TIME – Used to set the time on the DVR. (Set in military format)

Deletes all the contents on the HDD. When you choose “YES” on this option, press
“ENTER” and you will be prompted with the question shown: Press “→” to clear HDD or
press ”←” to cancel. Note: All data on the HDD will be lost if this is performed.

Resets the DVR back to the factory default settings. Select “YES” and press “ENTER” to
confirm switching it back to the default settings

. 

The event log keeps a record of all errors and alarms

that may occur on the DVR. Each of these are stored 
with a Time/Date Stamp. A single page can display 16 
recorded events. Press “

◄ ” or  “► ” to change the 

pages, or press “▲ ” +  “▼ ” to CLEAR the EVENT 
record.

(MENU)

TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER    
SYSTEM
EVENT