Maxtor SC324 User Manual

SYSTEM INCLUDES:

-3-

(DC 19V, 2A)

GETTING STARTED:

2.  Before operating the DVR, set the systems “time” first. (refer to page.16).

1.  Connect the AC power cord and plug it into an electrical outlet. The POWER LED will

illuminate orange. Other LED indicators will turn ON and illuminate RED. It takes
approximately 5 to15 seconds to boot the system with the message : “ HDD Detecting ”. 
Once successfully connected, the POWER LED will change to a green color, and the
Alarm LED will be ON.

NOTE : 1.  If the HDD is not installed correctly or not installed, the “HDD not found”

message will appear for 3 seconds and then return to a 4 CH Multiplexer
display mode.

2   If the keys on the DVR are locked, the default password is “0000” to disable the 

key lock.

3.  To switch the system (back to DVR Function), pull out the AC power cord. 

Before you reconnect  the power, press “FF” for the NTSC system or “REW” for
the PAL system. Note: North America is on an NTSC system, while European
countries use PAL. Reconnect the AC power cord, and the DVR will auto-detect
the change.