Clover Electronics CDR 0440 User Manual

33

1.

OFF: Daylight saving is not set.

2.

USA: Applies the USA daylight saving time.

3.

EU: Applies the EU daylight saving time.

- Select the GMT AREA using the control button (

ൖ Ÿ൘ ź

).

- Set the time difference with the standard time using the control button 

(

ൖ Ÿ൘ ź

).

4.

OTHERS: If the time zone is neither USA nor E, set the start and end 

date of the daylight saving period.

-

Select BEGIN or END using the control button (

ൖ Ÿ൘ ź

)

and press the SEL button.

-

Select the item using the control button (

ൖ Ÿ൘ ź

), select 

the setting value using the control button (

ൖ Ÿ൘ ź

) and 

press the ESC button to return to SET DATE & TIME setup 

menu.

- Do not set the start time to 23:00 for DLS.

- DLS can’t be applied, if the date of BEGIN and END is same.

Enable/Disable remote access through network client software.

Enable/Disable only key frame transmission. “ON” mode is favorable for use of 

low network bandwidth. Mostly, set “OFF” for normal use.

Enable/disable the send e-mail function.(ON/OFF)

TRANSMISSION MODE: Enable sending image of the channel that triggered 

the alarm when an alarm event is triggered.

IP NOTIFICATION: Enable/disable sending e-mail when the IP address of your 

DVR is changed.

EVENT ALARM: Enable/disable sending e-mail reports on the channel that 

triggered the alarm when an alarm event is triggered.