Clover Electronics CDR 0440 User Manual

B. How to access DVR from Remote PC?

LAN Connection – Using a switching hub

Connect to the system, using a hub (Switching hub) and an Ethernet cable (10BASE-T/100BASE-TX CAT 5

LAN cable)

Run the pre-install the network client software on the supplied CD. (Refer to Chapter 6. Network

access using the Exclusive network viewer)

Check the IP address from SETUP>SYSTEM>DESCRIPTION of DVR.

Run network client software and click CONNECT button.

Input IP address, Port No., and Password on the connect window. And click OK.

You can learn how to port forward many kinds of Routers from the bellow site.

http://www.portforward.com/english/routers/port_forwarding/routerindex.htm

Web viewer and Mobile-phone web viewer Network access beyond Router

In order to access beyond Router (Firewall), user must open 1 TCP port that is set on NETWORK > WEB

PORT. If this port is not open properly, user can not access DVR using direct Web viewer or Mobile-phone

web viewer. (Example: When NETWORK > WEB PORT is set as 80, 80 TCP port of IP address of DVR

must be open.)