Fortec Innovation User Manual
23
9.2.2 DiSEqC 1.2
y
Select Antenna-DiSEqC 1.2 using e/f buttons in
Antenna Setup mode.
y
Press OK to access the DiSEqC 1.2 set up menu.
y
To define the Set-up limits, press OK on the
corresponding row.
x
Move East/West: Press e/f buttons to move
the motor.
the motor.
x
East Limit: Press OK button to fix East Limit.
x
West Limit: Press OK button to fix West limit.
x
Disable Limits: Press OK button to disable
East/West Limits.
East/West Limits.
x
Go to Reference: Press OK button to move the
motor to center (0) position.
motor to center (0) position.
y
Press
f button to move west or e button to move east
on the corresponding row. Press OK button to stop.
y
Nudge East/West: Fine tune the position using e/f
buttons by adjusting 1 step.
y
Go to Satellite: Press OK button to move to the stored
satellite position.
y
To recalculate the satellite positions, move to the
corresponding row and press OK button.
y
Press the RED button on the remote control to save the current settings.
9.2.3 USALS
y
Select USALS in Positioner Setup and press OK.
y
Select an active transponder using f button.
y
Set your Longitude using 0~9 buttons and specify
East/West using e/f buttons.
y
Set your Latitude using 0-9 buttons and specify
South/North using e/f buttons.
y
Move to ‘Go to Satellite’ and press OK button to move
the motor to the satellite position.
y
To move the motor to the center (0) position, move the
cursor to the ‘Go to Reference’ row and press OK.
y
Press the RED button to save the current setting.