Lucent Technologies 555-230-024 User Manual
Basic Features
Issue 5 January 1998
A-23
555-230-024
Manual signaling
Allows one user to signal another user. The receiving user hears a two-second
ring. The signal is sent each time the button is pressed by the signaling user. The
meaning of the signal is prearranged between the sender and the receiver. Man-
ual Signaling is denied if the receiving telephone is already ringing from an
incoming call.
ring. The signal is sent each time the button is pressed by the signaling user. The
meaning of the signal is prearranged between the sender and the receiver. Man-
ual Signaling is denied if the receiving telephone is already ringing from an
incoming call.
Misoperation Handling
Defines how calls are handled when a misoperation occurs. A misoperation is
when calls are left on hold when the controlling station goes on hook.
when calls are left on hold when the controlling station goes on hook.
For example, a misoperation can occur under either of the following conditions:
■
If you hang up prior to completing a feature operation (in some cases,
hanging up completes the operation, as in call transfer). If, for example,
you place a call on hold, begin to transfer the call, dial an invalid extension
number, and then hang up, that’s a misoperation.
hanging up completes the operation, as in call transfer). If, for example,
you place a call on hold, begin to transfer the call, dial an invalid extension
number, and then hang up, that’s a misoperation.
■
When the system enters night service while attendant consoles have calls
on hold.
on hold.
The system administrator can alter the standard Misoperation Handling to ensure
that an external caller is not left on hold indefinitely, or dropped by the system
after a misoperation with no way to reach someone for help.
that an external caller is not left on hold indefinitely, or dropped by the system
after a misoperation with no way to reach someone for help.
This feature is used only in France and Italy.
Modem Pooling
Enables switched connections between digital data endpoints (data modules)
and analog data endpoints and acoustic coupled modems. Data transmission
between a digital data endpoint and an analog endpoint requires a conversion
since the DCP format used by the data module is not compatible with the modu-
lated signals of an analog modem. A modem translates DCP format into modu-
lated signals and vice versa. The Modem Pooling feature provides a set of
modems for such conversions.
and analog data endpoints and acoustic coupled modems. Data transmission
between a digital data endpoint and an analog endpoint requires a conversion
since the DCP format used by the data module is not compatible with the modu-
lated signals of an analog modem. A modem translates DCP format into modu-
lated signals and vice versa. The Modem Pooling feature provides a set of
modems for such conversions.
Multi-Appearance Preselection and Preference
Provides options for placing or answering calls on selected call appearances.
Ringing Appearance
Ringing Appearance
Preference automatically connects you to the incoming
ringing call when the user picks up the handset.
Idle Appearance Preference
automatically connects you to an idle appearance.
Preselection allows the user
to manually select an appearance. Preselection is used, for example, when you
want to reconnect with a held call or activate a feature. Preselection can be used
with a feature button. For example, if you press an Abbreviated Dialing button,
want to reconnect with a held call or activate a feature. Preselection can be used
with a feature button. For example, if you press an Abbreviated Dialing button,