Lucent Technologies 555-230-024 User Manual

Basic Features

Issue 5    January 1998

555-230-024

Allows telephone users, including Remote Access and incoming tie trunk users, 
to access dictation equipment. The dictation equipment is accessed by dialing 
an access code or extension number. The start/stop function can be voice or dial 
controlled. Other functions such as initial activation and playback are controlled 
by additional dial codes.

Permits authorized callers from remote locations to access the system via the 
public network and then use its features and services.There are a variety of ways 
of accessing the feature. After gaining access, you hear a system dial tone, and, 
for system security, may be required to dial a barrier code.

Allows an attendant or telephone user with console permission to activate and 
deactivate for an individual telephone or a group of telephones the following 
restrictions: outward, total, station-to-station, and termination restrictions.

Places calls in an ordered queue (first in, first out) when all trunks are busy. The 
telephone user who is trying to make a call is automatically called back when a 
trunk becomes available, and hears a distinctive three-burst signal when called 
back.

Allows the user of a multi-appearance telephone to turn audible ringing signals 
on and off. Visual alerting is not affected by this feature. When this feature is 
enabled, only Priority (three-burst) ring, Redirect Notification, Intercom ring, and 
manual signaling ring at the telephone. Internal and external calls do not ring.

Allows you to manually or automatically assign one of four ring types to each call 
appearance on a telephone. Whatever treatment you assign to a call appearance 
is automatically assigned to each of its bridged call appearances.