Intel D865GRH User Manual
Installing and Replacing Desktop Board Components
37
Connecting the Serial ATA Cable
The SATA cable (4-conductor) supports the Serial ATA protocol and connects a single drive to the
desktop board. Either end of the cable can be connected to the SATA drive or the connector on the
board (see Figure 12).
desktop board. Either end of the cable can be connected to the SATA drive or the connector on the
board (see Figure 12).
For correct cable function:
1. Observe the precautions in “Before You Begin” on page 25.
2. Attach either cable end to the connector (A) on the board.
3. Attach either cable end to the connector (B) on the drive.
2. Attach either cable end to the connector (A) on the board.
3. Attach either cable end to the connector (B) on the drive.
OM16337
A
B
Figure 12. Connecting the Serial ATA Cable