Lucent Technologies 108488222 User Manual
CALLMASTER® V Telephone Console User’s Guide 555-233-735
Issue 1
Operating Range Requirements
9
Operating Range Requirements
The total distance between the CALLMASTER V telephone (with Recorder
Interface active) and the recording device should not exceed
200 feet/ 60.96 meters.
Interface active) and the recording device should not exceed
200 feet/ 60.96 meters.
The distance between the CALLMASTER V telephone and the PBX must NOT
exceed the following:
exceed the following:
With 22-gauge wire, the distance between the CALMASTER V and the PBX
should not exceed 5,500 feet/ 1,676.4 meters; with 24-gauge wire, the
distance should not exceed 3,500 feet/ 1,066.8 meters; with 26-gauge wire,
the distance should not exceed 2,200 feet/ 670.56 meters.
should not exceed 5,500 feet/ 1,676.4 meters; with 24-gauge wire, the
distance should not exceed 3,500 feet/ 1,066.8 meters; with 26-gauge wire,
the distance should not exceed 2,200 feet/ 670.56 meters.
The record output impedance is approximately 600 ohms and the output
channel is isolated from the telephone via a voice transformer that meets the
UL 1950 Dielectric Breakdown requirement of 1,000 URMS for one minute.
channel is isolated from the telephone via a voice transformer that meets the
UL 1950 Dielectric Breakdown requirement of 1,000 URMS for one minute.
Telephone Installation
The CALLMASTER V telephone can be either desk-mounted or wall-mounted.
Read the following safety instructions and use the following directions and
refer to the following figure of the rear of the telephone for installing these
telephones.
Read the following safety instructions and use the following directions and
refer to the following figure of the rear of the telephone for installing these
telephones.
FIGURE 4
The CALLMASTER V Telephone Console, Rear View
1
3
4
5
2
6
7