Lucent Technologies 108522426 User Manual
30
Display Reference
Feature Screen Options
When you:
These options are available:
Have reached a busy extension
Barge-In
[Barge]
Leave
Msg
[LvMsg]
Cback
Sel
[CbckS]
Camp
On
[Camp]*
Have made a call to an extension and
Leave
Msg
[LvMsg]
Camp
On
[Camp]*
it is ringing or you are on an inside call
Park
[Park]
Direct
VM
[DrcVM]
Are connected to an outside line
Redial
[Rdial]
AccountCode
[Acct]
Park
[Park]
Follow
Me
[FlwMe]
Camp
On
[Camp]*
Direct
VM
[DrcVM]
*
Do not use if your company has a voice mail system.
Inspect Screen
An Inspect screen appears when you press the Inspect button and then press a line button. The
Inspect screen has the following functions:
An Inspect screen appears when you press the Inspect button and then press a line button. The
Inspect screen has the following functions:
• To enable you to view the status of system alarms and the number of busy trunks in a pool
• To display the extension and message status of DSS buttons
• To display Busy/Do Not Disturb status using DSS buttons
• To view call-handling information when you're on a call, have other calls on hold, or are on a
• To display the extension and message status of DSS buttons
• To display Busy/Do Not Disturb status using DSS buttons
• To view call-handling information when you're on a call, have other calls on hold, or are on a
conference
You cannot inspect information about dedicated feature buttons, unlabeled display buttons, or fixed
display buttons. If you are in Inspect mode and you press Exit (Home on an MLX-20L telephone),
Menu, or a dedicated feature button, your console leaves Inspect mode.
If you are on a call, you see calling information. If you are on a call and another call comes in, press
the Inspect button and then the line button with the ringing call to display information about the new
call without interrupting your current activity.
If you are not on a call, the line or feature programmed on the button is displayed. If the button is
programmed with Redial or Saved Number Dial, the last or saved number appears on the screen.
To exit from the Inspect screen, press the Exit button (Home button on MLX telephones).
display buttons. If you are in Inspect mode and you press Exit (Home on an MLX-20L telephone),
Menu, or a dedicated feature button, your console leaves Inspect mode.
If you are on a call, you see calling information. If you are on a call and another call comes in, press
the Inspect button and then the line button with the ringing call to display information about the new
call without interrupting your current activity.
If you are not on a call, the line or feature programmed on the button is displayed. If the button is
programmed with Redial or Saved Number Dial, the last or saved number appears on the screen.
To exit from the Inspect screen, press the Exit button (Home button on MLX telephones).
Feature Screen
This screen provides rapid access to often-used features; press the Feature button to display it.
Available features vary according to your calling activity and how your telephone is programmed. The
picture below shows the Feature screen when you have just selected an ICOM or SA button, or when
you are not on a call. The table shows the sets of features available on each of the other three Feature
screens. (If you have a 4424D+ or MLX-28D telephone, you may need to press the
Available features vary according to your calling activity and how your telephone is programmed. The
picture below shows the Feature screen when you have just selected an ICOM or SA button, or when
you are not on a call. The table shows the sets of features available on each of the other three Feature
screens. (If you have a 4424D+ or MLX-28D telephone, you may need to press the
or More
button, respectively, to see all of the features in a telephone.) The 4424D+ and MLX-28D telephone
display abbreviations are shown in [ ].
display abbreviations are shown in [ ].
Menu
Exit