Lucent Technologies 108286063 User Manual
2
Issue 2 May 1998
Announcement Boards
The list configuration command did not display translated but uninserted
announcement boards properly.
announcement boards properly.
AUDIX Transfer
AUDIX transfers did not complete when the number of outstanding calls was
greater than 31. Now, AUDIX transfers complete when the number of outstanding
calls is 32. Also, for Intel machines, the maximum number of AUDIX ports
allowed is now 64.
greater than 31. Now, AUDIX transfers complete when the number of outstanding
calls is 32. Also, for Intel machines, the maximum number of AUDIX ports
allowed is now 64.
Call Center
When trying to redirect a call on no answer to a VDN while processing a failed
"converse on" vector step, the call went into limbo as call processing tried to
route call to the RONA VDN. Now, attempts to RONA a call to a VDN are blocked
if the call is in vector processing of a "converse on" vector step. A new vector
event is generated, "RONA to VDN in converse.”
"converse on" vector step, the call went into limbo as call processing tried to
route call to the RONA VDN. Now, attempts to RONA a call to a VDN are blocked
if the call is in vector processing of a "converse on" vector step. A new vector
event is generated, "RONA to VDN in converse.”
Call Classification
There was no way to administer dB adjustment for the Call Classifier. Now, a new
field, Global Classifier Adjustment (dB), on page 1 of the system-parameters
ocm-call-classification form allows for administration of dB adjustment for the
Call Classifier when using the OCM feature.
field, Global Classifier Adjustment (dB), on page 1 of the system-parameters
ocm-call-classification form allows for administration of dB adjustment for the
Call Classifier when using the OCM feature.
Call Coverage/Call Forwarding/Coverage of Calls
Redirected Off-Net (CCRON)
Redirected Off-Net (CCRON)
When an off-net coverage or forwarded call cannot find an available trunk, the
call is redirected back to the original principal.
call is redirected back to the original principal.
When an off-net coverage or forwarded call could not find an available trunk,
busy tone was played back to the calling party, effectively ending the call. Now,
the call is redirected back to the original principal whenever possible.
busy tone was played back to the calling party, effectively ending the call. Now,
the call is redirected back to the original principal whenever possible.
If a user forwarded a station to a remote number for which the length of the
number (including an ARS or AAR feature access code) was 16 digits, and the
number required an interdigit timeout (typically, an international number, for
example, 88+011-44-719710089), the number was accepted. But when a call
was forwarded, the system waited indefinitely for the end-of-dialing timeout or a
pound sign (#). (Note that a pound sign is stored with the number when the
number of digits is less than 16.) Now, Call Forwarding works correctly for any
number of digits up to, and including, 16. Call Forwarding cannot store more than
16 digits at present.
number (including an ARS or AAR feature access code) was 16 digits, and the
number required an interdigit timeout (typically, an international number, for
example, 88+011-44-719710089), the number was accepted. But when a call
was forwarded, the system waited indefinitely for the end-of-dialing timeout or a
pound sign (#). (Note that a pound sign is stored with the number when the
number of digits is less than 16.) Now, Call Forwarding works correctly for any
number of digits up to, and including, 16. Call Forwarding cannot store more than
16 digits at present.