Fujitsu F9600 F9600c User Manual

GENE

RAL INFORMA

T

ION

3

A Flash is required in order to use many of the 
F9600/F9600c features. Firmly press and release 
the hookswitch to Flash. The timing defaults for 
holding down the hookswitch (the button that is 
pressed when the handset is placed on the 
handset cradle) are programmed into the system 
software. The following can occur:

• The call may disconnect if you hold the 

hookswitch down too long (over 1-1/2 
seconds). 

• The feature may not be activated if you do not 

hold down the hookswitch for a long enough 
time (at least a 1/2 second).

There are several different call progress tones 
generated by the F9600/F9600c system that you 
hear on your telephone receiver. They indicate the 
following: 

• Feature availability.
• Feature registration or cancellation 

acceptance.

• Call waiting.

Internal dial tone is the continuous humming that 
you hear when you lift the handset. This tone 
indicates that you may begin dialing.

External dial tone is heard when you lift the 
handset and dial a code for an outside line. This 
tone indicates that you can place an outside call.

Recall dial tone occurs after you press Flash 
during a conversation. The tone is three short 
beeps followed by internal dial tone. This shows 
that you have accessed the system correctly. You 
can now dial a feature code.