Sony KDF-60XS955 User Manual
Introducing the Sony LCD Projection TV
18
KDF-55/60XS955
2-059-372-11(1)
Loosen the screw that holds the lamp, then pull out the lamp.
5
Reattach the lamp.
Place back the new lamp and tighten the screw.
Replace the lamp cover, slide the knob to right till the v/V mark
matches, and then tighten the screw.
matches, and then tighten the screw.
✍
The lamp is very hot immediately after use. Never touch the front
glass of the lamp or the surrounding parts.
glass of the lamp or the surrounding parts.
✍
After it has cooled, place the used lamp into the empty box of the
replacement lamp. Never put the used lamp into a plastic bag while
the lamp is hot.
replacement lamp. Never put the used lamp into a plastic bag while
the lamp is hot.
✍
If the lamp cover screw is inserted incorrectly, the lamp may not
operate properly. In such a case, remove the screw, insert it
correctly and then tighten the screw completely.
operate properly. In such a case, remove the screw, insert it
correctly and then tighten the screw completely.
✍
If the lamp cover is not reattached securely, the self-diagnostic
function may be triggered and the POWER/STANDBY indicator
flashes three times (see page 122).
function may be triggered and the POWER/STANDBY indicator
flashes three times (see page 122).