Sony KDP 65XBR2 User Guide
Setting Up the Projection TV
31
Connecting Cables
1
Using an A/V cable, connect the i.LINK device’s Audio and
Video OUT jacks to the projection TV’s Audio and Video IN
jacks.
Video OUT jacks to the projection TV’s Audio and Video IN
jacks.
2
Using an i.LINK cable (see page 30), connect the device’s i.LINK
jack to either of the projection TV’s i.LINK jacks.
jack to either of the projection TV’s i.LINK jacks.
✍
Before connecting this unit to i.LINK-compatible equipment, see the instruction
manual of the i.LINK device to be connected.
manual of the i.LINK device to be connected.
DIGITAL
AUDIO
(OPTICAL)
OUT
PCM/DOLBY DIGITAL
1
2
i.LINK cable
TV
Sony digital cable
A/V cable
set-top box
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
✍
i.LINK devices can be “hotplugged” (connected and disconnected while they
are still powered on). The projection TV automatically recognizes the device
and displays the screen shown on page 33.
are still powered on). The projection TV automatically recognizes the device
and displays the screen shown on page 33.