Sony KDF-E60A20 Manual

KDF-E55/60A20

2-593-962-11(3)

For best results, use this connection if:
❑

Your cable company scrambles all channels, which requires you to use a 
cable box.

❑

You do not have a VCR. (If you have a VCR, see pages 32 and 33.)

With this connection you can:
❑

Use the TV’s remote control to change channels coming through the 
cable box to the TV’s VHF/UHF jack. (You must first program the 
remote control for your specific cable box.)

Connect the CATV cable to the cable box’s input jack.

Use a coaxial cable to connect the cable box’s output jack to the TV’s 
VHF/UHF jack.

Run Auto Program, as described in “Setting Up the TV Channel List” 
on pages 30.

page 25.

VHF/UHF

Use the cable box

Tune the TV to the channel the cable box is set to (usually channel 3 
or 4) and then use the cable box to switch channels.

Set up the TV remote control to operate the cable 
box

Program the remote control. See “Programming the Remote 
Control” on page 44.

Activate the remote control to operate the cable 
box

Press 

SAT/CABLE (FUNCTION)

 once, and the 

SAT/CABLE

 

indicator lights up.

Prevent the accidental switching of TV channels When using the cable box, ensure that the TV remains tuned to the 

channel that the cable box is set to (usually channel 3 or 4).