Sony KDF-E60A20 Manual

KDF-E55/60A20

2-593-962-11(3)

Place the new lamp into its place, then tighten the screw.
Mount the new lamp securely. Failure to mount correctly may cause a 
fire or the screen to go dark.

Push the cover back on. Make sure that the hole on the cover aligns with 
the hole on the unit. Reattach the lamp cover by tightening the screw.

Reattach the front panel securely.

✍

The lamp is very hot immediately after use. Never touch the glass 
portion of the lamp or the surrounding parts.

✍

After it has cooled, place the used lamp into the empty box of the 
replacement lamp. Never put the used lamp into a plastic bag.

✍

If the lamp cover screw is inserted incorrectly, the lamp may not 
operate properly. In such a case, remove the screw, insert it 
correctly and then tighten the screw completely (see “Indicators” on 
page 11).

✍

If the lamp cover is not reattached securely, the self-diagnostic 
function may be triggered and the POWER indicator flashes three 
times (see page 11).