Delfield 536-SR68 & 536-SRR68 User Manual

Dual View Series Service and Installation Manual

Delfield

™

For customer service, call (800) 733-8829, (800) 733-8821, Fax (989) 773-3210, www.delfield.com

5. Also open the compressor compartment housing and

visually inspect the refrigeration package. Be sure lines

are secure and base is still intact.

6. Freight carriers can supply the necessary damage forms

upon request.

7. Retain all crating material until an inspection has been

made or waived.

Uncrating the Equipment

First cut and remove the banding from around the crate.

Remove the front of the crate material, use of some tools will

be required.

Warning: While uncrating do not lay unit on side.

If compressor is set on side, return to upright

position for 24 hours to allow for all compressor

oil to drain back into compressor.

The serial number is located on the rear of the unit on the

bottom right hand side.
Always have the serial number available when calling for

parts or service.

without written permission is prohibited. “Delfield” is a registered

trademark of The Delfield Company.

Serial Number Location . . . . . . . . . . . . . . . . . . . . . . . . . 2

Receiving and Inspecting the Equipment. . . . . . . . . . . . 2

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Display Case Glass Replacement. . . . . . . . . . . . . . . . . . 3

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Pressure Control Settings . . . . . . . . . . . . . . . . . . . . . . . 5

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Replacement Parts Lists . . . . . . . . . . . . . . . . . . . . . . . . 6

Standard Warranties. . . . . . . . . . . . . . . . . . . . . . . . . . .7-9

Contents

Serial Number Location

Receiving And Inspecting The Equipment

Even though most equipment is shipped crated, care should

be taken during unloading so the equipment is not damaged

while being moved into the building.

1. Visually inspect the exterior of the package and skid or

container. Any damage should be noted and reported to

the delivering carrier immediately.

2. If damaged, open and inspect the contents with the

carrier.

3. In the event that the exterior is not damaged, yet upon

opening, there is concealed damage to the equipment

notify the carrier. Notification should be made verbally as

well as in written form.

4. Request an inspection by the shipping company of the

damaged equipment. This should be done within 10 days

from receipt of the equipment.

Specifications

Model

Length

Overall

Depth

Height

Shelf

Area

Storage

Capacity

Design

Load

H.P.

Volts

Amps

NEMA

Plug

Ship Weight

536-SR68

36”

(91.4cm)

28”

(71.1cm)

68”

(172.7cm)

19.9ft2

21.8ft3

1286

1/2

120

12.0

5-15P

600lbs/272kg

536-SRR68

36”