Atek electronic LG10B User Manual

Your Logio is set by default to turn off after one minute of inactivity in order to save 
battery power and protect against intrusions. Although it is not recommended, as 
described above you can change this setting to two or three minutes in the 

 setup 

options menu.
After the set time of inactivity elapses, your Logio will automatically shut off. If it 
turns off before you finished editing or adding a new record, or changing setup 
options, the changes will be lost. And just like when you turn it off manually, if your 
Logio turns off automatically you have to enter your master passcode when you turn 
it back on.
Some users may prefer for their Logio to stay on longer for a particular session but 
do not want to change their normal (semi-permanent) auto-off setting. For example, 
an IT administrator working in a server room on a special maintenance day may want 
to do multiple tasks that involve using passwords. Logio provides for such needs by 
allowing you to add temporarily (i.e., for the current session) to your normal auto-
off time additional one minute increments by pushing and holding 

 and pushing 

 in “view”, “edit”, or “new” mode. Make sure you have carefully pushed and held 

down the 

 button, otherwise you will turn off your Logio when you push the 

 

button!
The first time you do this in a particular session, the screen will display the following:

The screen will automatically return to the prior screen after a slight delay, or you can 
manually return to the prior screen by pushing 

 or any of the arrow buttons. Or, 

if you want to add more time, just continue to hold down, or push and hold down 
again, the 

 button, and then push 

 .  The screen will display how many minutes 

are being added for this session to the normal auto-off time. For example, if you have 
added four minutes, the screen will look like this: