Atek electronic LG10B User Manual
Logio User’s Manual, page
Low Battery Warning & Changing the Battery
Battery life depends on how often you use your Logio. If it is low on battery power,
when you turn it on you will see a flashing low battery icon on the right side of line
3 of the screen (master passcode entry line). When you start entering your master
passcode, the icon will disappear.
when you turn it on you will see a flashing low battery icon on the right side of line
3 of the screen (master passcode entry line). When you start entering your master
passcode, the icon will disappear.
When the battery is low, you will be able to continue viewing records, but in order to
protect against a sudden lack of power causing data corruption due to uncompleted
memory writing, you will not be able to set up new records, edit records, delete
records, or change setup options until you change the battery.
There is no loss of data when you take out the battery, and all settings stay as you
had them prior to changing the battery, except if you changed the contrast level,
which defaults back to level three.
When viewing records when the battery is low, the contrast level may need adjusting
so you can continue to read the screen easily. You will not be able to do that by using
the
protect against a sudden lack of power causing data corruption due to uncompleted
memory writing, you will not be able to set up new records, edit records, delete
records, or change setup options until you change the battery.
There is no loss of data when you take out the battery, and all settings stay as you
had them prior to changing the battery, except if you changed the contrast level,
which defaults back to level three.
When viewing records when the battery is low, the contrast level may need adjusting
so you can continue to read the screen easily. You will not be able to do that by using
the
button, which is locked when the battery is low, but you can directly change
the contrast level by pushing and holding
and then pushing
or
. This new
setting will be saved until you change it again or until the battery totally depletes or
you change the battery.
you change the battery.
To change the battery, first turn off your Logio. Then turn it upside down, put your
thumbnail into one of the two curved grooves next to the label, and gently pull out
the battery tray half way. Then turn the Logio face up and gently pull the tray all the
way out. You will notice the plus sign (+) is on the top. Remove the battery from the
tray and replace it with a new CR2016 lithium coin cell battery oriented the same way
with the plus sign (+) on top. Make sure the battery sits all the way down in the tray.
Put the tray back into the Logio by angling it slightly so that one barbed corner goes
in first, and then straighten out the tray and gently slide it all the way all the way in.
Please recycle the old battery per applicable environmental regulations.
thumbnail into one of the two curved grooves next to the label, and gently pull out
the battery tray half way. Then turn the Logio face up and gently pull the tray all the
way out. You will notice the plus sign (+) is on the top. Remove the battery from the
tray and replace it with a new CR2016 lithium coin cell battery oriented the same way
with the plus sign (+) on top. Make sure the battery sits all the way down in the tray.
Put the tray back into the Logio by angling it slightly so that one barbed corner goes
in first, and then straighten out the tray and gently slide it all the way all the way in.
Please recycle the old battery per applicable environmental regulations.
Low Battery Warning & Changing the Battery