Kathrein UFS 821si User Manual
2
Preface
Dear customer,
this Operating Manual is intended to help you make the
fullest use of the extensive range of functions offered by
your new satellite receiver.
We have tried to make the operating instructions as easy
as possible to understand, and to keep them as concise as
possible. To help you understand particular specialist terms
that cannot be translated, we have added a short glossary
at the end of the manual.
The power switch is an environmentally friendly feature. If
you will not be using your receiver for a longer period, you
should therefore use the power switch to disconnect it from
the power supply to save energy. For shorter breaks, you
can switch the receiver to standby on the remote control,
which uses only a minimal amount of energy.
We wish you good reception and much pleasure using your
new PVR satellite receiver.
Your
KATHREIN Team
Important Information
The channels available on the satellites and transponders are
subject to continual change. In such cases, it is necessary
to reset the channels as the factory preset programming
corresponds to the situation on the date of manufacture.
The information for this reset can be found on the Internet
or in relevant magazines.
Your receiver is factory fitted with the latest software version.
We, however, always work on adapting the software to the
wishes of our customers and to developments in technology.
The “Software and Programme List Update” section contains
additional information.
Please keep the original packaging in case you need to
return the product at any time.
The hard disks are fragile due to their construction and
are only adequately protected in the receiver by the
original packaging.
If receiver is not shipped correctly the warranty on the
hard disk will be voided.
Make a note of the receiver’s basic settings, so as to be
able to restore them if necessary!
DiSEqC™ is a trademark of Eutelsat.