Fujitsu Siemens Computers LOOX 400 User Manual

Page of 66
 
Operating the Pocket PC 
A26391-K150-Z120-1-7619, Edition 3
 
31 
If the battery charge level of your Pocket PC is low, you should connect the PSC11R-050 power 
adapter (see the section "Connecting PSC11R-050 power adapter")
Synchronising data with new PC/notebook 
If you want to synchronise data with a new PC/notebook, you must first install ActiveSync on this new 
PC/notebook and establish a new ActiveSync partnership (see the corresponding explanation in the 
section "Initial start-up"). 
Backing up data with FSC Backup 
The Pocket PC saves your data such as appointments, addresses, things to do and notes, as well 
as all documents in the RAM memory of the device. These data are backed up to your PC during 
synchronisation with ActiveSync. However, to also make current data backups away from home or 
while on business trips, there is FSC Backup
FSC Backup backs up an image of the RAM memory of your Pocket PC on a memory card ("Secure 
Digital I/O" or "MultiMediaCard") or in the integrated memory area, the LOOXstore (if this memory 
area exists). If your Pocket PC has experienced a power failure and the data from the RAM memory 
have been deleted, then you can restore a data backup you have made with FSC Backup. This 
provides you with the data status at the time of the backup again within just a few minutes.  
As FSC Backup backs up and restores the entire RAM memory of your device, the registry, which 
contains the configuration data of your device and any programs installed in the RAM memory, is 
also backed up. 
FSC Backup also provides you with the option of backing up and restoring single databases such as 
contacts, calendar or tasks as well as your connection settings. You will find information as to how 
you proceed for this in the FSC Backup help file on your Pocket PC. 
Before you start a backup, make sure that sufficient memory space is available on the memory card 
or in the device, and that the battery holds a sufficient charge. If the battery charge level is low, 
connect the PSC11R-050 power adapter to charge the battery. 
 
!
 
When you conduct a backup, you may not carry out any other operating procedure before 
the backup has been completed. Do not press any keys, touch the display or remove a 
memory card. 
 
Backup 
► Select 
Start - Programs - FSC Backup
► 
When the screen of the FSC Backup program appears, select a destination for the backup. 
Select the entry SD-MM Card for a memory card. 
► Tap 
on 
the 
Backup button. 
A message is output when the backup has been completed.  
► Touch 
OK (navigation bar) to confirm your setting. 
The screen of FSC Backup appears again on the display.