Kathrein UFS 790sw User Manual

56

Press the 

 button to open the main menu. Select the “Security” menu using the 

 buttons 

and press the 

 button. Enter the receiver PIN (factory setting “0000”) and confi rm it by pressing 

the 

 button. The following display appears (see example below):

Use the 

 buttons to select the lines to be changed and use the 

 buttons to perform the 

settings. 

Receiver Lock:
If the receiver lock is set to “On”, when the receiver is switched on it will request input of the PIN.

Menu Lock:
If the menu lock is set to “On”, the PIN must be entered as soon as the main menu is opened.

Channel Lock:
If the channel lock is set to “On”, the PIN must be entered as soon as a channel is opened that 
has been marked as locked in “Edit Channel List”.

Change Device-PIN:

Press the 

 button, you will be requested to enter the old PIN. Confi rm the entry of the old PIN using the 

 button. Now enter the new PIN and confi rm by pressing the 

 button. Then you must enter the new 

PIN again and also confi rm using the 

 button. “The receiver PIN has now been changed” is displayed. 

Press the 

 button to close the message.