Waterpik Technologies CF-261(C) Leaflet

Models CF-201(C), CF-261(C)

Your new showerhead will fit a standard 1/2 ” shower arm. Do not 

attach this product to a plastic shower arm since it may not 

provide adequate support.

Tools are not required. Do not use pipe tape or any other 

sealants when installing the showerhead. These materials are not 

necessary and may cause the nut to loosen prematurely. Hand 

tightening is sufficient to secure the shower thread. Make sure 

the washer is in the end of the nut.
1.  Remove old showerhead. Clean pipe threads thoroughly.
2. Attach the flexible shower arm collar to the showerhead, being 

careful to align the threads of the showerhead to the threads 

of the flexible shower arm.

3. Straighten the flexible shower arm before trying to screw onto 

the shower pipe. Again, take care in aligning the nut to the 

shower pipe so you do not cross threads.

4. While installing, support the showerhead and 

hold onto the nut rather than the cover. 

Turn only the nut to tighten. Do not twist 

the flexible shower arm covering 

during installation. (This could 

damage the covering and/or 

cause the product to malfunction.)

5. Tighten the shower nut onto the pipe 

securely by hand. Do not over tighten  

or use pliers.

6. Slowly turn on cold water and check for leaks. If leaks occur, 

re-tighten all connections.

7.  Do not use excessive force in positioning the showerhead 

and/or arm.

8. If the showerhead is not maintaining its position, re-tighten the 

showered and shower arm nuts.

Clean the filter screen at least once a year, or whenever you 

notice a drop in water pressure. To remove, unscrew the nut 

from the pipe. Remove screen by turning it counter-clockwise 

(pliers may be used) and rinse. The white flow restrictor 

beneath filter screen is also removable for cleaning. Tip the 

nut and the flow restrictor will fall out. Flow restrictor must be 

reinstalled with pointed end facing in. Reinstall filter screen 

and rubber washer.
•  Cleaning is required when mineral deposits appear on the 

spray orifices to maintain proper working conditions.

•  Clean the flexible nozzles by rubbing with a finger or soft 

bristled toothbrush.

•  Soaking and cleaning with household vinegar will help 

remove mineral build up.

•  Do not clean or rinse any part with harsh chemicals, heavy 

duty cleaners or abrasives. This may damage parts or 

finish and may void warranty.

Water Pik, Inc. warrants to the original purchaser of this product 

that it is free from defects in material and workmanship for as long 

as the original purchaser owns the product. Water Pik will at our 

election, replace any part of the product which in our opinion is 

defective, provided that the product has not been abused, 

misused, altered or damaged after purchase. (This includes 

damage due to use of tools or harsh chemicals). In the event an 

item qualifying for warranty action has been discontinued, we will 

replace it with what we deem to be the closest available product. 

Water Pik is not responsible for labour charges, installation or other 

consequential costs. The responsibility of Water Pik shall not 

exceed the original purchase price of the product. Save your 

receipt as proof of purchase is required for warranty action.

FN 20007766-F AB

Spray

Change

Button

Collar

Flexible Arm

Shower

Arm Nut

Bracket

Adapter

Spray

Change

Button

5 foot hose

Filter Screen

Washer

Flow Regulator

with O-ring

(black O-ring

faces out)

Showerhead

Nut

Filter

Screen

Flow Regulator

1. Remove old showerhead. Clean pipe threads thoroughly.
2. Slightly loosen swivel collar on bracket.
3. Hand tighten pivot ball to pipe.
4. Hand tighten adaptor to showerhead.
5. Hand tighten hose to adapter and bracket.
6. Place showerhead in bracket.

9.5L per minute maximum 

flow is limited by the flow 

restrictor. For low water 

pressure areas, flow 

restrictor may be removed. 

To remove, unscrew filter 

screen by turning counter-

clockwise. Tip pivot ball 

assembly and flow control 

will fall out for cleaning or 

removal.

Spray Change

Button

Spray Change

Button

To change settings, from 

either the full-body spray 

or the concentrated power 

spray, push the button 

atthe base of the 

showerhead so it extends 

to the opposite side of its 

current position. (It will 

move horizontally to the 

showerhead.)

This product is covered by one or more of the following patents. U.S.: 4,674,687; 
5,316,216; 5,449,206(Lic); 5,865,378; 5,997,047(Lic); 6,164,569; 6,164,570; 6,230,989; 
6,454,186; 6,626,210; 6,629,651; 6,641,057; 6,739,523; 6,758,826; 7,066,411B2; 
7,111,798B2; 7,144,666B2; D406,636; D415,247; D418,902; D418,903; D422,053; 
D422,336; D427,661; D440,641; D450,805; D450,806; D450,807; D451,169; D451,170; 
D451,171; D451,172; D451,583; D451,980; D452,553; D452,725; D452,897; D453,370; 
D453,551; D457,937; D485,887; D490,498; D527,440S; D528,631S; D529,151S; 
D533,253S; D577,099S; D577,793S; D581,014S; D590,048S; 

Canadian: 94868; 94871; 

96859; 96860; 96861; 96862; 96863; 96864; 96865; 96866; 96867; 96891; 96892; 
96893; 96894; 96895; 96896; 2,277,060; 

Mexico: 15037; 186852; 218192; 

Germany: 40105034.3; 40502480; M9706460.2; U.K.: 3,021,116; 3,021,863; 3,021,864; 
E.U.: 000341706-0001; 000341706-0002; 000341706-0003; France: 013345; 
Switzerland: 128049; China: ZL98802624.4; 93120174.8; ZL200530004083.3; 
Hong Kong: 1003339; South Korea: 389207; Australia: 726023; Singapore: 44333; 
Japan: 1230114; Additional: 00601962 (Belgium, Switzerland, Germany, France, United 
Kingdom, Italy, Luxembourg, The Netherlands).
Cascadia

®

 is a trademark of Water Pik, Inc. registered in Canada, EU, Switzerland, and the 

United States.
Waterpik

®

 is a trademark of Water Pik, Inc. registered in Argentina, Australia, Austria, Canada, 

China, Czech Republic, Hungary, India, Japan, Poland, Russian Federation, South Africa, 
Switzerland, Ukraine, and the United States.
Waterpik

®

 (stylized) is a trademark of Water Pik, Inc. registered in Canada, EU, Mexico, 

Switzerland, and the United States.
© 2009 Water Pik, Inc.

Water Pik, Inc.

www.waterpik.com

Printed in China

Showerhead made in China

Call our toll-free Customer Service Line:

8:00 a.m. to 4:00 p.m. MT, Monday-Friday 

DATE: 27 May 2009    CLIENT: Water Pik, Inc.
FILENAME: FN20007766-F_AB_CascadiaInst.indd

DESCRIPTION: Cascadia Showerhead Instruction Manual - Canada

FILE TYPE: Adobe InDesign CS4

PREPARED BY: Brian Colon

FORM: 20007766-F AB

SIZE FLAT: 8-1/2” x 8-1/2” 

SIZE FOLDED: 3-5/8” x 4-1/4”

FOLDS: Vertical trifold, Horiz bifold

DIELINE: N/A

INK: Black

NOTES: