Manualsbrain.com
  1. Manuals
  2. Brands
  3. Lucent Technologies
  4. 4.1
  5. User Manual

Lucent Technologies 4.1 User Manual

Download
Page of 363
For PBX or Centrex systems that require a dial-out code to make calls
outside the PBX or Centrex system, include the dial-out code followed by
one or more pauses (if available) on an Auto Dial button for a number
outside the PBX or Centrex system. (See “Changing Settings to Support
PBX or Centrex Services” in Chapter 2 for more information.)
Examples
The examples below show some possible entries for an Auto Dial number in
Step 4 of “Programming.”
■
■
■
■
Outside Phone Number. Enter the phone number (up to 28 digits) exactly
as you would dial it. For example, to program 555-2398, press [
 5 
] [
 5 
] [
 5 
] [
 2 
]
[
 3 
] [
 9 
] [
 8 
].
Extension Number. Press the left [
 Intercom 
] button and enter the two-digit
extension number. Press [
 ★ 
] before the extension number to program the
Auto Dial button to voice signal an extension. For example, to program
extension 20 for voice signaling, press left [
 Intercom 
] [
 ★ 
] [
 2 
] [
 0 
]. The display
reads:
Intercom *20
Feature Code.  Enter the appropriate code. For example, to program a
button to turn on the message light at extension 20, press [
 Feature 
] [
 0 
] [
 9 
] [
 2 
]
[
 0 
]. When you press the programmed button, the Message Light at
extension 20 turns on.
Programming
To program an Auto Dial button:
1 .
Press [
 Feature 
] [
 0 
] [
 0 
] [
 System Program 
] [
 System Program 
] [
 Central Program 
].
2 .
Enter the number of the extension to be programmed.
3 .
Press a programmable button.
4 .
Enter an outside phone number, feature code, account code, or PBX/Centrex
feature access code; or press left [
 Intercom 
] and enter an extension number.
5 .
Repeat Steps 3 and 4 to program additional Auto Dial buttons, or exit
programming mode.
Auto Dialing     
5-15