Lucent Technologies 4.1 User Manual

This System Programming procedure identifies up to 48 extensions that are to
signal when a doorphone button is pressed. When a person uses the
doorphone, it signals all alert extensions at the same time. If the alert extension
is a system phone, the call signals with a unique ding-dong  sound to distinguish
it from other calls. Additionally, if you have two doorphones, they signal with
different tones so you can distinguish between them.

■

■

You must use Doorphone Extensions (#604 and #605) to identify the
extensions to which doorphones are connected.

If Do Not Disturb is active at a doorphone alert extension, the person at the

doorphone hears signaling, but the alert extension is not signaled.

You cannot bridge two doorphones together.

1 = Not an Alert Extension   

✔

2 = Doorphone 1 Alert Extension
3 = Doorphone 2 Alert Extension
4 = Doorphones 1 and 2 Alert Extension

To identify doorphone alert extensions:

1.

Press [

] [

] [

] [

] [

] [

] [

] [

] [

].

2.

Enter the first alert extension number (10–57). For example, to identify
extension 10, press [

] [

].

3.

To change the alert status, press [

] until the appropriate value displays.

4.

To identify another alert extension, press [

] or [

] until the

extension number shows on the display. Then repeat Step 3.

5.

Select another procedure or exit programming mode.

Doorphone Alert Extensions (#606)