Lucent Technologies 4.1 User Manual

This System Programming procedure identifies extensions to which fax
machines are connected.

■

■

If you want to monitor fax machine status and make one-touch transfers to
the fax machine, see Auto Dialing to program a Fax Management button
and “Fax Management Feature” in Chapter 4 to use the button.

To prevent other extensions from interrupting a fax call, program the fax
extension for Automatic Extension Privacy (#304).

■

■

Remove voice messaging system mailboxes from fax machine extensions.

If an automatic fax call comes in on a line covered by the PARTNER MAIL
system, the Automated Attendant Service of that system may be
programmed to automatically transfer the call to a fax extension or to the
extension Hunt Group for the fax machines (if you have multiple fax
machines). See the PARTNER MAIL documentation for instructions.

1 = Assigned
2 = Not Assigned   

✔

To identify a Fax Machine Extension:

1.

Press [

] [

] [

] [

] [

] [

] [

] [

] [

].

2.

At the 

Extension: 

prompt, enter the extension to which the fax machine is

connected. For example, to select extension 30, press [

] [

].

3.

To assign or unassign the extension, press [

] until the appropriate value

displays.

4.

To identify another extension, press [

] or [

] until the extension

number shows on the display. Then repeat Step 3.

5.

Select another procedure or exit programming mode.

Fax Machine Extensions (#601)