Lucent Technologies 4.1 User Manual

PARTNER-model system phones support the PARTNER-CA48 Call Assistant
Intercom Autodialer at extensions 10 and 11. The autodialer provides Auto Dial
buttons for all of the extensions in your system (up to 48). The status lights next
to each button indicate calling activity at that extension. Users can program the
Auto Dial buttons for either intercom ringing, voice signaling, or manual
signaling. (Note that each user can have only one Auto Dial button—either on
the system phone or on the autodialer—for another extension in the system.)
The Auto Dial buttons allow the user to dial, signal, or transfer calls to system
extensions with one touch. For more information about Auto Dial buttons, see
“Auto Dialing” in Chapter 5.

You can also use industry-standard single-line rotary or touch-tone telephones,
including feature phones with built-in feature buttons and lights, with the system.
This guide refers to such telephones as standard phones. Lucent
Technologies-certified standard phones are recommended.

The following Lucent Technologies phones can make use of the system’s
message waiting capability:

■

■

2500 YMGL Single-Line Analog Telephone Set

2500 YMGK Single-Line Telephone with Message Waiting Light and

Recall Button

■

■

■

■

8101 Analog Telephone

8102 Analog Telephone

8110 Analog Telephone

7102 Plus Analog Voice Terminal

Check with your Lucent Technologies Representative or local Authorized Dealer
to find out if other standard phones with message waiting lights will work.

For message waiting capability, you must connect standard phones with LED
compatible message waiting lights to Release 3.1 (R3.1) or later 206 modules,
and equip the system with an R3.1 or later primary processor module. This
message waiting capability does not apply to standard phones with  neon-type
message waiting lights.

Overview