Lucent Technologies 4.1 User Manual

This Hunt Group is used exclusively for the extensions associated with the voice
messaging system hardware. Do not assign any other extensions to this group.
A voice messaging system requires special hardware and set up
procedures—refer to “Voice Messaging Systems” in Chapter 4 and to the
documentation shipped with the voice messaging system for more information.

1 = Assigned to group
2 = Not Assigned to group   

✔

To assign extensions to a Hunt Group:

1.

Press [

] [

] [

] [

] [

] [

] [

] [

] [

].

2.

At the 

Group: 

prompt, enter a group number (1–7). For example, to select

group 1, press [

]. A display similar to the following appears:

Hunt Group 1

Extension:

3.

Enter the desired extension number. For example, to select extension 31,
press [

] [

].

4.

To assign or unassign the extension, press [

] until the appropriate value

displays.

5.

At this point:

■

■

To assign or unassign another extension, press [

] or [

]

until the extension number shows on the display. Then repeat Step 4.

To program another group, press [

] [

], enter a

new group number, and repeat Steps 3 and 4.

6.

Select another procedure or exit programming mode.

Hunt Group Extensions (#505)