Lucent Technologies 4.1 User Manual

This System Programming procedure identifies individual extensions that are to
operate as key extensions even though the system is configured for Hybrid
mode. If an extension’s Line Access Mode is changed to Key, individual lines
can be assigned to specific buttons on that extension’s phone regardless of
whether they are part of a pool.

■

■

■

■

When an extension is changed from Pooled to Key, any previously assigned
pool buttons are removed from the extension and Pool Access Restriction
(#315) is set to No Access. Additionally, the extension is programmed with
factory settings for Line Assignment (#301), Line Access Restriction
(#302), Automatic Line Selection, and Line Ringing.

When an extension is changed from Key to Pooled, any previously assigned
line buttons are removed from the extension and Pool Access Restriction
(#315) is set to No Restriction. Additionally, the extension is programmed
with factory settings for Pool Line Assignment (#314), Pool Extension
Assignment (#314), Automatic Line Selection, and Line Ringing.

Extension 10 operates as a key extension regardless of how the system is
configured. The Line Access Mode for extension 10 cannot be changed.

Extensions that are programmed as key extensions cannot access pools
either by pressing pool buttons or by dialing pool access codes.

1 = Pooled   

✔ 

all extensions except 10

2 = Key   

✔ 

extension 10 only

To change the Line Access Mode setting for a specific extension:

1.

2.

3.

4.

5.

6.

Press [

] [

] [

] [

] [

] [

] [

] [

] [

].

Enter the desired extension number. For example, to program extension 18,
press [

] [

].

To change the Line Access Mode, press [

] until the appropriate value

displays.

To program another extension, press [

] or [

] until the extension

number shows on the display. Then repeat Step 3.

Repeat Steps 3 and 4 for all extensions that you want to change.

Select another procedure or exit programming mode.

Line Access Mode (#313)