Lucent Technologies 4.1 User Manual

This feature accesses the loudspeaker paging system, if you have one
connected to the system through the PAGE jack on the primary processor
module.

■

■

■

■

Users can make Simultaneous Paging announcements over the
loudspeaker paging system and the idle system phones assigned to
Calling Group 1. See Calling Group Extensions (#502) to program
Calling Group 1.

You can specify the loudspeaker paging system as a hotline alert extension
so that the hotline phone can be used to make announcements over the
loudspeaker. For more information, see Hotline (#603).

You can program a Loudspeaker Paging button on a system phone to
access the loudspeaker with one touch.

If the loudspeaker paging system is in use, a user attempting to make an
announcement hears a busy tone.

To program a Loudspeaker Paging button:

1.

Press [

] [

] [

] [

] [

] [

].

2.

Enter the number of the extension to be programmed with this feature.

3.

Press a programmable button.

4.

Press left [

] [

] [

].

5.

Program another button for this extension or exit programming mode.

To make an announcement over the loudspeaker paging system:

1.

Press the programmed button or [

] [

] [

], then lift the handset.

2.

Speak into the handset. (To avoid feedback, do not use the speakerphone.)
Your voice is heard through the loudspeaker paging system.

If your paging system supports announcements to zoned areas, refer to the
instructions packaged with the device to make zoned announcements.

Loudspeaker Paging (I70)