Lucent Technologies 4.1 User Manual

This feature turns on the message light at a specified extension (where XX is an
extension number from 10–57).

You may be able to use this feature to signal someone at a doorphone

This feature turns on the message light on system phones and standard
phones that have message lights. (See “Standard Telephones” in Chapter 1

for a list of standard phones that have message lights.)

For message waiting capability, standard phones with message waiting
lights must be connected to an R3.1 or later 206 module and the system
must be equipped with an R3.1 or later primary processor module.

On a standard phone, the message light flashes (only when the phone is
idle) to indicate that the extension has received a message.

Do not use this feature for an extension that is covered by the voice
messaging system. The voice messaging system automatically turns on the
message light at a subscriber’s extension when a message is left in the
mailbox.

■

■

■

■

■

■

■

■

If you use this feature to signal someone at a doorphone extension, you
must use Message Light Off to turn off the light.

You can program a Message Light On button on a system phone to turn the
message light on at a specific extension with one touch.

To program a Message Light On button:

1.

Press [

] [

] [

] [

] [

] [

].

2.

Enter the number of the extension to be programmed with this feature.

3.

Press a programmable button.

4.

Press [

] [

] [

].

5.

Optionally, dial the two-digit extension number of your most common

destination, or skip to Step 6 if you want only the feature code on the
button.

6.

Program another button for this extension or exit programming mode.

Message Light On (F09XX)