Lucent Technologies 4.1 User Manual

Page of 363
Programming
To restrict an extension from making or receiving calls on all the lines in a
specific pool:
1.
2.
3.
4.
5.
6.
Press [
 Feature 
] [
 0 
] [
 0 
] [
 System Program 
] [
 System Program 
] [
 # 
] [
 3 
] [
 1 
] [
 5 
].
Enter the number of the extension to be programmed. For example, to
program extension 23, press [
 2 
] [
 3 
]. A display similar to the following
appears:
Pool Access Rstr 23
Pool:
Enter the pool number (880, 881, 882, or 883) to be restricted at this
extension. For example, to restrict pool 881, press [
 8 
] [
 8 
] [
 1 
]. The current
restriction displays.
To change the pool restriction for this extension, press [
 Next Data 
] until the
At this point:
To restrict another pool at this extension, press [
 Next Item 
] or [
 Prev Item 
] until
the pool number shows on the display. Then repeat Step 4.
To restrict another extension, press [
 Next Procedure 
] [
 Prev Procedure 
] and
begin at Step 2.
Select another procedure or exit programming mode.
Pool Access Restriction (#315)     
5-153